Search Results

Search found 28439 results on 1138 pages for '9 10'.

Page 892/1138 | < Previous Page | 888 889 890 891 892 893 894 895 896 897 898 899  | Next Page >

• RTL8188CE doesn't connect to any wifi access points

  - by Drakmail

  I'm using network manager to connect. Also, tryed iwconfig. Results are same. I even try to connect to open access point — results are same. More information: Drakmail@thinkpad-x220:~$ lspci | grep Network | grep -v Ethernet 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) Drakmail@thinkpad-x220:~$ uname -a Linux thinkpad-x220 3.1.0 #1 SMP PREEMPT Wed Oct 26 02:19:49 UTC 2011 x86_64 Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz GenuineIntel GNU/Linux Drakmail@thinkpad-x220:~$ dmesg | tail -n 10 [ 846.901574] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 906.812461] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 966.728810] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 1026.639676] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 1030.925574] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin At this moment I try to connect to open wifi ap: [ 1031.252403] wlan0: direct probe to 00:24:8c:55:fa:ed (try 1/3) [ 1031.451943] wlan0: direct probe to 00:24:8c:55:fa:ed (try 2/3) [ 1031.651658] wlan0: direct probe to 00:24:8c:55:fa:ed (try 3/3) [ 1031.851354] wlan0: direct probe to 00:24:8c:55:fa:ed timed out [ 1086.544960] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin My distribution: Drakmail@thinkpad-x220:~$ cat /etc/*version AgiliaLinux release 8.0.0 (Sammy) (Something between Slackware and Archlinux). Also, I saw that wifi module to often trying to load a firmware file. Any ideas what it would be?

  Read the article

• Stronger laptop_mode in Linux

  - by Vi

  Can I have stronger laptop mode in Linux? I want to spin down the hard drive and prevent it to spin up even if something wants to read something not in cache. In general I want to have these modes: Normal Current laptop mode Stronger laptop mode: spin up only when needs to read something uncached (and cache it). No spinups to write something unless really memory pressure (Exception: explicit "sync" command in console). Kernel is allowed to keep processes in D-sleep for 10 seconds for that. Forced laptop mode: do not spin up, period. Keep offending processes in D-sleep unless I turn off this mode. Like there is a bomb instead of hard drive. I also want to have access times tracked (mount -o atime), but I don't want the hard drive to be spinned up only to update them. Is there some settings or kernel patches that can get closer to this? May be I should write special io scheduler for "forced laptop mode"? E.g. echo suspend > /sys/block/sda/queue/scheduler to lock the drive and echo cfq > /ys/block/sda/queue/scheduler to unlock it again?

  Read the article

• Computer wont start, just blinks on and off

  - by Ryan

  This is really strange. I had a comp that was working fine for over a year, then suddenly it started to shut off, it got so bad that I press the power button and in around 30 secs while booting windows it would shut off, then 20 secs... then 10 secs, then it refused to start all together. So I bought a new PSU (850w Thermaltake, the old one was 550w corsair) thinking that was the problem, I fitted the new PSU now and its the same thing, I press the power button and my fans start for a split second (they have led lights on them, so the lights come on) and then everything goes off again. I thought maybe it was my power button that was loose on my comp, luckily I had another chassis near by so I disconnected the powerSW from the old one and put ran the powerSW from the new chassis, press the power on the new chassis and same thing, it blinks for a split second and off again. Double checked connections from the PSU to the cpu power as well as board mobo power, its tight. It's pretty unlikely both the PSUs have the same exact problem so am lost... Suggestions?

  Read the article

• optimal folder structure for storing 100k files on a USB drive

  - by cherouvim

  I need to store 100k files (around 40GB) in a USB drive. Each file has a unique int id (e.g 45000). Option one is to put all files in a single folder: root/ root/1.pdf root/2.pdf root/3.pdf ... root/567.pdf root/568.pdf root/569.pdf ... root/10001.pdf root/10002.pdf root/10003.pdf ... root/99998.pdf root/99999.pdf root/100000.pdf Option two is to create a [1-9][0-9]* folder hierarchy based on that id: root/ root/1/file.pdf root/2/file.pdf root/3/file.pdf ... root/5/6/7/file.pdf root/5/6/8/file.pdf root/5/6/9/file.pdf ... root/1/0/0/0/1/file.pdf root/1/0/0/0/2/file.pdf root/1/0/0/0/3/file.pdf ... root/9/9/9/9/8/file.pdf root/9/9/9/9/9/file.pdf root/1/0/0/0/0/0/file.pdf Which option will scale better? I can understand that the second option will require tons of folders but each folder will at most contain 10 folders and 1 file. Maintenance will not be an issue since everything will be controlled by an application. Note that this is a USB drive on linux and based on the above I'd also like to know whether I should go with FAT32 or NTFS.

  Read the article

• Why database partitioning didn't work? Extract from thedailywtf.com

  - by questzen

  Original link. http://thedailywtf.com/Articles/The-Certified-DBA.aspx. Article summary: The DBA suggests an approach involving rigorous partitioning, 10 partitions per disk (3 actual disks and 3 raid). The stats show that the performance is non-optimal. Then the DBA suggests an alternative of 1 partition per disk (with more added disks). This also fails. The sys-admin then sets up a single disk, single partition and saves the day. The size of disks was not mentioned but given today,s typical disk sizes (of the order of 100 GB), the partitions ; would be huge, it surprises me that a single disk with all partitions outperformed. Initially I suspect that the data was segregated and hence faster reads. But how come the performance didn't degrade as time went by with all the inserts and updates happening? Saw this on reddit, but the explanation was by far spindle/platter centered. There was no mention in the article about this. Is there any other reason? I can only guess that the tables were using a incorrect hash distribution causing non-uniform allocation across disks (wrong partitioning); this would increase fetch times. Any thoughts?

  Read the article

• Does a high run queue length average result in poor performance for a web server?

  - by Domino

  I'm trying to narrow down the list of suspects of web servers that perform moderately well most of the time with occasional bouts of poor performance. I'm analyzing the data collected and summarized by sar. I've noticed a few things, one of which is high number of tasks in the run queue. 10:15:01 AM runq-sz plist-sz ldavg-1 ldavg-5 ldavg-15 blocked 10:25:01 AM 2 150 0.05 0.05 0.06 0 10:35:01 AM 4 149 0.08 0.12 0.09 0 10:45:01 AM 6 150 0.13 0.19 0.15 0 10:55:01 AM 1 150 0.08 0.10 0.13 0 11:05:01 AM 4 150 0.20 0.35 0.23 0 11:15:01 AM 3 149 0.02 0.09 0.15 0 11:25:01 AM 7 149 0.04 0.05 0.11 0 11:35:01 AM 4 150 0.14 0.15 0.13 0 11:45:01 AM 6 150 0.27 0.18 0.16 0 11:55:01 AM 5 150 0.08 0.10 0.13 0 12:05:01 PM 3 149 0.35 0.40 0.26 0 12:15:01 PM 19 155 0.02 0.10 0.16 1 12:25:01 PM 2 150 0.00 0.07 0.12 0 12:35:02 PM 3 151 0.58 0.24 0.17 0 12:45:01 PM 8 150 0.02 0.13 0.15 0 12:55:01 PM 6 149 0.81 0.29 0.18 0 01:05:01 PM 3 148 0.00 0.09 0.13 0 01:15:01 PM 7 149 0.00 0.04 0.11 0 I believe these are 10 minute averages. Is this an indicator that the web server is not performing as fast as it could if the average run queue length was lower?

  Read the article

• Why is only one wget command working in my crontab?

  - by afEkenholm

  I wish to fetch content from a PHP script on my server two times a day, altering a query variable lang to set what language we want, and save this content in two language specific files. This is my crontab: */15 * * * * ~root/apache.sh > /var/log/checkapache.log 10 0 * * * wget -O /path/to/file-sv.sql "http://mydomain.com/path/?lang=sv" 11 0 * * * wget -O /path/to/file-en.sql "http://mydomain.com/path/?lang=en" The problem is that only the first wget command line is being executed (or to be precise: the only file that is being written is /path/to/file-sv.sql). If I switch the second and the third row, /path/to/file-en.sql gets written instead. The first line always runs as expected, no matter where it is. I then tried using lynx -dump "http://mydomain.com/path/?lang=xx" > /path/to/file-xx.sql to no avail; still only the first lynx line executed successfully. Even mixing wget and lynx did not change this! Getting kinda desperate! Am I missing something? There are thousands of articles on crontab (combined with) wget or lynx, but all seems to cover basic setups and syntax. Does anyone got a clue of what I am doing wrong? Thanks, Alexander

  Read the article

• I can't connect to internet via lan cable because 2032 battery died and my bios bios info is now empty [closed]

  - by Rand Om Guy

  I have a compaq CQ61-112SL from about 5 years now... the main battery is almost dead, doesn't keep more then 10 minutes. anyway my problem is that my motherboard battery didn't have any more energy left a few days ago and since then I can't access internet through lan cable but only via wifi. I need cable though. I saw that on my BIOS setup page there were a bunch of parameters missing like serial number, UUID, product number and stuff like that. Also when I start the notebook it prints something like : No serial found. or something like that. I don't really know if the reason why my lan cable doesn't work is the empty BIOS but i assume that's it. If it's not please enlighten me. Or anyway tell me how to update the serial number and product number to the real ones (instead of the 0000000000000 that is now in my bios). I downloaded HP DMI which should make it possible to set these variables on the BIOS but i'm on Windows 8 64bit and the executable file that I need to open for my laptop model says it can't run on 64 bit.

  Read the article

• Windows 7 PC freezes frequently with hard disk light constantly on

  - by Senthil

  I recently replaced a defective hard disk with a new one - Windows 7 - "A disk read error occured. Press Ctrl + Alt + Del to restart" I have been using the new hard disk with a Windows 7 installation for about 4 days. Now it has started freezing frequently. Sometimes every 2 minutes and sometimes every 10 seconds. There is lots of software installed - I am a developer and my PC is full of IDEs, database servers, web servers, developer tools, testing tools, all browsers etc.. My windows is up to date as of now. I have installed ALL updates including optional drivers etc. All my installed software is up to date. I scanned my computer using Microsoft Security Essentials and found nothing malicious. I did a chkdsk /r and found no problems. I did a memory diagnostic and found no problems. When I go into safe mode, it doesn't freeze and I am able to use it normally for longer periods of time. What other steps can I take to locate the problem?

  Read the article

• Timeperiod Setting

  - by Alvin G. Matunog

  I am running Nagios 3.2.3 on CentOS 5.7 32bit and I have a bit of a problem scheduling timeperiods. Please help me. Objective, to stop monitoring during server restart (since the server will be restarted and will be restarted automatically because of updates and system backup). The restart is scheduled every 1st Sunday of every month. My monitoring runs 24x7 but during restarts I want to stop the monitoring and resume after 30 mins. So every 1st Sunday I want my schedule to be 00:00-11:30,12:00-24:00. This means that it will stop at 11:30 and resumes on 12:00nn. If I set this on every Sunday there is no problem. But if I set this time on every 1st Sundays, it stops at 11:30 but resumes on the next day (Monday) and not on 12:00nn Sunday. I don't know what I am missing. If I set on regular weekdays there is no problem. But on Offset weekdays (1st Sunday) it doesn`t work the way it should have. Here is my definition; define timeperiod{ name 1st_sunday timeperiod_name 1st_sunday alias No monitoring every 1st Sunday thursday 1 00:00-11:30,12:00-24:00 } define timeperiod{ timeperiod_name irregular alias regular checking use 1st_sunday sunday 08:30-22:00 monday 08:30-22:00 tuesday 08:30-22:00 wednesday 08:30-22:00 thursday 08:30-19:10,19:20-22:00 friday 08:30-22:00 saturday 08:30-22:00 } Can anyone help me? Please? Thank you.

  Read the article

• Outlook 2010 Crashing Unpredictably

  - by cbkadel

  Very often when I open up Outlook 2010 and start doing actions in it, it will hang and become non responsive. I have tried letting it finish, but it never does come back (up to 20 minutes of letting it try). I generally have to restart Outlook and try again. Usually after about an hour of doing this, Outlook somehow snaps out of it and works for the rest of the day. It's generally in the morning (though I doubt that's the key variable). Generally, the emails that cause problems are HTML/formatted, but not always. What I've done so far to troubleshoot: Install Latest Outlook Hotfix (I think Dec 14, 2010) Start Outlook in Safe Mode Neither of those steps seem to make a difference. Usually - after about 10-15 restarts of Outlook on any given day, then it starts working thereafter. My next step is to uninstall/reinstall Office 2010, but I'm hoping someone has seen this and knows what to do about it - though not sure. My configuration is like this: Microsoft Online Services (using Microsoft's Sign In App) - Connecting to Exchange I have two other Exchange accounts in this profile (new feature in 2010) connected through Outlook Anywhere. Life Meeting Conferencing Add In I've disabled the People tab/add in. I've disabled the "Send to Bluetooth" add-in. Not sure what else to do?

  Read the article

• mysql - moving to a lower performance server, how small can I go?

  - by pedalpete

  I've been running a site for a few years now which really isn't growing in traffic, and I want to save some money on hosting, but keep it going for the loyal users of the site and api. The database has one a nearly 4 million row table, and on a 4gb dual xeon 5320 server. When I check server stats on this server with ps -aux, i get returns of mysql running at about 11% capacity, so no serious load. The main query against mysql runs in about 0.45 seconds. I popped over to linode.com to see what kind of performance I could get out of one of their tiny boxes, and their 360mb ram XEN vps returns the same query in 20 seconds. Clearly not good enough. I've looked at the mysql variables, and they are both very similar (I've included the show variables output below, if anybody is interested). Is there a good way to decide on what size server is needed based on what I'm coming from? Is it RAM that is likely making the difference with the large table size? Is there a way for me to figure out how much ram would be ideal?? Here's the output of the show variables (though I'm not sure it is important). +---------------------------------+------------------------------------------------------------+ | Variable_name | Value | +---------------------------------+------------------------------------------------------------+ | auto_increment_increment | 1 | | auto_increment_offset | 1 | | automatic_sp_privileges | ON | | back_log | 50 | | basedir | /usr/ | | bdb_cache_size | 8384512 | | bdb_home | /var/lib/mysql/ | | bdb_log_buffer_size | 262144 | | bdb_logdir | | | bdb_max_lock | 10000 | | bdb_shared_data | OFF | | bdb_tmpdir | /tmp/ | | binlog_cache_size | 32768 | | bulk_insert_buffer_size | 8388608 | | character_set_client | latin1 | | character_set_connection | latin1 | | character_set_database | latin1 | | character_set_filesystem | binary | | character_set_results | latin1 | | character_set_server | latin1 | | character_set_system | utf8 | | character_sets_dir | /usr/share/mysql/charsets/ | | collation_connection | latin1_swedish_ci | | collation_database | latin1_swedish_ci | | collation_server | latin1_swedish_ci | | completion_type | 0 | | concurrent_insert | 1 | | connect_timeout | 10 | | datadir | /var/lib/mysql/ | | date_format | %Y-%m-%d | | datetime_format | %Y-%m-%d %H:%i:%s | | default_week_format | 0 | | delay_key_write | ON | | delayed_insert_limit | 100 | | delayed_insert_timeout | 300 | | delayed_queue_size | 1000 | | div_precision_increment | 4 | | keep_files_on_create | OFF | | engine_condition_pushdown | OFF | | expire_logs_days | 0 | | flush | OFF | | flush_time | 0 | | ft_boolean_syntax | + - For some reason, that table formats properly in the preview, but apparently not when viewing the question. Hopefully it isn't needed anyway.

  Read the article

• Slow, choppy video playback with nVidia 8600GT

  - by user5351

  I have an nVidia 8600GT card (made by EVGA) on a machine with Windows Vista (AMD Athlon X2 processors) and four gigs of ram. It runs pretty good, but I have had some slow/choppy/stuterring video playback issues whenever watching flash videos on Youtube or other sites. The problem is there with both Firefox and IE flash videos, but is maybe worse with Firefox. I also tried Linux with nVidia's binary drivers and it was about the same. I downloaded EVGA precision which allows me to control stuff like the fan and clock speed. The card's temp (in both Vista and Linux) is usually at 66C when idle (not playing a game or watching anything). It goes up a little when watching a video (maybe 68-72C). Any ideas on how to fix this? UPDATE: The issues are both with full screen and embedded flash videos. I have Flash 10.0.32.18 (always make sure I use most recent for security), and the CPU is an AMD Athlon 64 X2 Dual Core Processor 4000+ at 2.11 GHZ. The current GPU driver installed is the most recent GeForce one from last July.

  Read the article

• Apache and Virtual Hosts Problem on OS X

  - by Charles Chadwick

  I recently formatted and installed my iMac. I am running 10.6.5. Prior to this format, I had the default Apache web server up and running with several virtual hosts, and everything ran beautifully. After formatting, I set everything back up again, and now Apache is acting funny. Here is a description of what I have going on. My default root directory for the Apache Web server is pointed to an external hard drive. In my httpd.conf, here is what I have: DocumentRoot "/Storage/Sites" Then a few lines beneath that: <Directory /> Options FollowSymLinks AllowOverride All Order deny,allow Allow from all </Directory> And then beneath that: <Directory "/Storage/Sites"> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny Allow from All </Directory> At the end of this file, I have commented out the user dir include conf file: Include /private/etc/apache2/extra/httpd-userdir.conf And uncommented the virtual hosts conf file: Include /private/etc/apache2/extra/httpd-vhosts.conf Moving on, I have the following entry in my vhosts file: <VirtualHost *:80> DocumentRoot "/Storage/Sites/mysite" ServerName mysite.dev </VirtualHost> I also have a host record in my /etc/hosts file that points mysite.dev to 127.0.0.1 (I also tried using my router IP, 192.168.1.2). The problem I am coming across is, despite having PHP files in /Storage/Sites/mysite, the server is still looking at /Storage/Sites. I know this because in the DocumentRoot contains a php file with phpinfo() (whereas the index.php file in mysite has different code). I have tried setting up other virtual hosts, but they are still doing the same thing. Also, "NameVirtualHost *:80" is in my vhosts file. I saw as a solution on another thread here. Doesn't seem to make a difference. Any ideas on this? Let me know if this is not enough information.

  Read the article

• RAID5 issue after replacing motherboard and upgrading firmware

  - by 8steve8

  ok so ive had a 4x2TB(samsung HD204UI w/firmware patch) raid5 array working normally for about a month. It was in a h57 gigabyte motherboard using the intel raid with Windows 7 x64. Today I got an intel h67 motherboard, so I upgraded the intel raid drivers to 10.1.0.1008 from 9.6.0.1014, and I'm not sure if i checked after a reboot, but it caused no problems. I swapped in the new dh67 motherboard, and my array status was "failed". 2 of the 4 drives listed themselves as members, while the other two drives listed themselves as non-members. I tried going back to the old h57 mobo, and downgrading the raid drivers, but the issue remains. It's not port dependent, 2 of the drives always come up as non-members regardless of what port or motherboard they are plugged into. This screenshot should show that the SNs match, which raises the question why the software doesn't realize the drive is a member of the array. I'd like to know if anyone has experienced anything similar, and what should I do, can I force the drive to be recognized as a member (without wiping data)?

  Read the article

• Windows xp blinking under score after bios

  - by heyjoe

  so this is for an older pc I have to repair for a friend. The pc has an hdd of about 60 something gb, It uses win xp and let's say 60-70% of the boots it hangs on showing only an underscore bilking line after bios screen, rest of the times it boots fine or the computer shuts down on xp loading screen. Sometimes if you let it alone while the underscore is blinking, it will boot after a while, like a few minutes, some times it won't boot at all even if you give him more time, like one hour. When it boots successfully the pc seems to work fine. I think it's a bad hard disk and i'm about to suggest buying a new one and switching it but I don't have enough experience and i would hate making him buy a new hdd and not solving the problem. anyone has any tips? I know there are other topics about blinking underscores or cursors while xp is booting but the issues about the pc shutting itself down or sometimes booting really freaks me out. Can't format everything and re install until about 10 days from now, cause the dude has some program for his business on this pc and I have to migrate it when the next computer arrives, however he needs to use it until then. so please advise, thx.

  Read the article

• Computer won't start up. Stuck on Lenovo splash screen. Help Diagnose

  - by Ace Legend

  I have some (I'm not sure exactly what model) Lenovo 21" IdeaCentre. Honestly, the computer works off and on. I have had problems with it not being able to shutdown, which I fixed. The fan seems to be constantly running, a few other problems as well. Anyway, nobody was using it when all of a sudden it switched to a blue screen. I was in the kitchen, but when I got over to the computer I read the message. It said something about bad drivers, but that is all I saw and then it restarted. However, when it got to the Lenovo Splash screen, nothing happened. I waited there for over 10 minutes, but still nothing. I tried to turn of the computer, but the only way to do it was to pull out the power cable. I then removed all USB devices and tried again. Still nothing. It also won't respond to keyboard input when I try to use enter to interrupt normal startup. My guess is some piece of hardware is damaged inside the machine. However, I have no idea what piece it is. Does anybody have any idea what could be wrong with it? Thanks.

  Read the article

• can't install anything anymore with apt-get

  - by Aymane Shuichi

  Welcome this is the log I have when trying to install anything (php5-fpm after removing it) apt-get install php5-fpm Reading package lists... Done Building dependency tree Reading state information... Done php5-fpm is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up php5-fpm (5.4.4-14+deb7u10) ... insserv: warning: script 'S55IptabLes' missing LSB tags and overrides insserv: warning: script 'S55IptabLex' missing LSB tags and overrides insserv: There is a loop between service IptabLes and mountnfs if started insserv: loop involving service mountnfs at depth 8 insserv: loop involving service networking at depth 7 insserv: loop involving service mountnfs-bootclean at depth 10 insserv: There is a loop between service rc.local and mountall if started insserv: loop involving service mountall at depth 6 insserv: loop involving service checkfs at depth 5 insserv: loop involving service kbd at depth 11 insserv: There is a loop between service rc.local and mountall-bootclean if started insserv: loop involving service mountall-bootclean at depth 7 insserv: loop involving service urandom at depth 9 insserv: There is a loop between service IptabLes and mountdevsubfs if started insserv: loop involving service mountdevsubfs at depth 2 insserv: loop involving service udev at depth 1 insserv: There is a loop at service rc.local if started insserv: There is a loop at service IptabLes if started insserv: Starting IptabLes depends on rc.local and therefore on system facility `$all' which can not be true! (x99 times repeated ) insserv: Max recursions depth 99 reached insserv: loop involving service postfix at depth 2 insserv: There is a loop between service IptabLes and udev if started insserv: loop involving service mountkernfs at depth 1 insserv: loop involving service IptabLes at depth 1 Now here is the error i get insserv: exiting now without changing boot order! update-rc.d: error: insserv rejected the script header dpkg: error processing php5-fpm (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: php5-fpm E: Sub-process /usr/bin/dpkg returned an error code (1) The biggest operation I held before this was updating nginx from 1.2 to 1.6 and it was thanks to this site : here is the link : How to upgrade nginx from 1.2 to 1.6 on debian 7 Please help !

  Read the article

• MacBook Pro (2007 - ATI-Card) Screen goes half black then shuts down the entire computer

  - by BluePerry

  Hey, when I'm starting my MBP I get about 10-60 seconds of the booting process before the screen goes half black (Its like applying a black to transparent gradient from the left side of the screen to the middle of the screen). After a 5 seconds the entire screen blacks out and the MBP shuts down. There have been issues with heat and some minor artifacts on the screen in the past but nothing serious as far as I know. Everything could be resolved by rebooting or letting the MBP cool down a bit. I would like to identify the problem now. There are 3 possibilities I can think of right now: My graphics card is defect and shuts down after a few seconds. (But if thats true, I find it kind of hard to explain the HALF black screen) My LCD-Panel is defect and sends back wrong signals so the system shuts down??? (I not sure about that) My fan or/and thermal sensors are defect and forcing the graphics card to shut down. Can anyone point if I'm right or if there yet another reason for this. I'd be thankful for any hint or tips. Cheers, Per

  Read the article

• Install mod_perl2 on Apache 2.2.14 (Ubuntu10.04)

  - by MICADO

  Hi guys, I have installed via synaptic package ibapache2-mod-perl2. I tried this line in httpd.conf: "LoadModule perl_module modules/mod_perl.so" Apache tells me when I reload the server : "[warn] module perl_module is already loaded, skipping". Well ok, but when i try to look in the browser to a repertory i don't have access .Apache send me the error : Forbidden You don't have permission to access /cgi-bin/ on this server. Apache/2.2.14 (Ubuntu) Server at 192.168.0.10 Port 90 But this should show modperl is installed and that's not the case... I would like my virtual host that follows run with mod_perl2 <VirtualHost v1:80> ServerAdmin webmaster@localhost ServerName v1 DocumentRoot /var/www/v1 <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/v1/html/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /var/www/v1/cgi-bin/ <Directory "/var/www/v1/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> I'd like to know how to configure mod_perl2. Do i have to change something in the apache configuration file to make my cgi repertory works with mod_perl2? Thanks to any help!

  Read the article

• INACCESSIBLE_BOOT_DEVICE after installing Linux on same drive

  - by kdgregory

  History: My PC was configured with two drives: an 80G on IDE 0 Primary that was running Win2K, and a 320G on IDE 0 Secondary that was running Linux (Ubuntu). I decided to pull the 80Gb drive out of the system, so dd'd the entire 80 G drive (/dev/sda) onto the 320 (/dev/sdb) -- this included the MBR and partition table. Then I pulled the drive, plugged the 320 into IDE 0 Primary, and rebooted. The Windows partition worked at this point. Then I installed Ubuntu into the remaining space on the 320. It works. However, when I try to boot into Windows, I get a BSOD with the following message: *** STOP: 0x0000007B (0x89055030,0xC000014F,0x00000000,0x00000000) INACCESSILE_BOOT_DEVICE Before the BSOD I see the Win2K splash screen, and it claims to be "starting windows" for a couple of seconds -- so it appears that the first stage boot loader is working as expected. Ditto when I try booting in Safe Mode. After reading the Microsoft KB article, I booted into the recovery console and tried running chkdsk /r. It refused to run, claiming that the drive was corrupted (sorry, didn't write down the exact error message). However, I can mount the drive from Linux, and access all files. And for what it's worth, I can scan the drive using the Linux "Disk Utility" (this is Ubuntu, the menus don't show real program names), it claims the drive to be clean. The KB article mentioned that boot.ini could be the problem, so here it is: timeout=10 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows 2000 Professional" /fastdetect Any pointers on what to do next?

  Read the article

• Problem creating ODBC connection to SQL Server 2008 with Vista

  - by earlz

  Well, I'm trying to get a database schema thing working, first I tried just doing it in Linux where I'm more comfortable, but ODBC seems to be a hack there and I couldn't get it to work. So I figured it shouldn't be too hard in Windows.. Ok, so I created a SQL Server Client Alias so that I can simply same windowsserver to refer to my SQL server. Then, I went to the ODBC configuration in Control Panel. I clicked Add in the User DSN section. I chose Native SQL Server (10), and then clicked next. Then I typed a short name and a description and gave the servername as windowsserver/SQLEXPRESS Then, I click next, give it my user name and password and click next. Then, after like 2 minutes it says "Login Timeout Expired" What can be wrong here? I know the server is configured cause I have SQL Server Management Studio opened up with that server in it. I'm also just trying to connect over regular TCP/IP and my firewall is disabled.

  Read the article

• How to connect android client to the localhost of Apache server (php) inside my laptop?

  - by user1796310

  I'm trying to create android apps which able sending data through wifi connection to my laptop Apache Server and MySQL database. I use the samsung galaxy tab 10.1 as my mobile device. and the protocol i used is HttpGet or HttpPost. And i use XAMPP( with Apache& SQL) to do the server and process the php. But, due to android cannot detect adhoc network from laptop, i use Virtual Router ( for window 7) to create virtual access point and make the tablet able connect to my laptop. But the problem is: [1] in my apps (client-android), where the httpget or httppost to which url? localhost in my laptop- 127.0.0.1 or localhost in android 10.0.0.1? or the ip address of the virtual router? [2]so, if i want access from android to the localhost(laptop-Apache) to call the php to run? which port? which ip address /url that i need to put in android apps(httpget)? and do i need to modify anything in httpconfig for XAMPP? thanks alot.

  Read the article

• Windows 7: Dual Monitor Issue

  - by sdoca

  I have a Dell laptop with a docking station and two external monitors hooked up. I'm running Windows 7 64 bit. Originally, the two monitors were the same - Dell 1908FP. I have replaced one of them with an HP LA2405. I have set the HP 24" (1920 x 1200 connected via DVI port) as montior 1 and extended to use the Dell 19" (12080 x 1024 connected via VGA port) as monitor 2. I have set my power plan so that when the laptop is plugged in, it will turn the monitors off after 10 minutes, but it will not put my laptop to sleep. However, now that I have the HP monitor, when I unlock my laptop and the monitors come back on, all my windows are resized and shifted to the top left corner of the HP monitor as if they had been resized for display on the smaller Dell monitor. A co-worker has the exact same laptop and monitor configuration but doesn't experience this issue, so I figure there's some configuration that's different but we can't find it. I haven't been able to find any mention of a similar problem doing an internet search, but I'm not really sure what terms to use in my search. Anybody have any suggestions as to what may be causing the issue? OS setting? Monitor setting? EDIT: My laptop is using the Intel Graphics and Media Control Panel/drivers.

  Read the article

• UEFI boot options gone

  - by user1797930

  I ran into some issues booting Windows after trying to make a complete backup of the disc. After searching for information about some of the error codes, I found advise to change some BIOS settings, but instead I thought I would just "restore defaults" to make sure all settings were set as originally intended. After doing so, all UEFI boot options except for "Windows Boot Manager" are gone. That means, including the CD/DVD drive, so I cannot even boot from a recovery DVD anymore - and as explained, Windows is not able to boot either. Do you have any advice? When I added a secondary drive originally, it was automatically added to the boot options menu. Even when removing and re-adding the drive physically, the option does not appear again. I have tried unplugging power, and hold down start button for 10 seconds, and boot afterwards - no change. It's a laptop so removing CMOS battery is not an option. I have read information that it is an issue with data removed from NVRAM, but I am unable to find a way to recover it. "Add new boot options" requires a path - but the CD/DVD was originally available without any CD's in the drive - so there is no path available to add the drive. I did try to open EFI shell, but it seems not to be embedded in the UEFI/BIOS. It just says "not found". I'm really lost here - any advice is appreciated.

  Read the article

< Previous Page | 888 889 890 891 892 893 894 895 896 897 898 899  | Next Page >